There are 3 parts: the white backing, the decal its self and the clear transfer taper.
If your vinyl wall decal is fairly large, get a friend to help you set it up! This is not only more
convenient but also more fun! CLEAN & WIPE DRY your wall before installing, this will help 100%
Lay your decal on a hard, flat surface and rub firmly over the wall decal with a credit card.
This will strengthen the bond between the vinyl decal and the transfer tape.
(this way the vinyl decal won't stay on the white backing when you remove it, if some of the white
backing sicks to your vinyl....take your finger and gently remove, comes of easily!)
Take hold of your 3 part decal and slowly start to peel the white backing away from the decal and
transfer tape, peel back about 5 inches. Make sure the vinyl decal sticks properly to the transfer
tape. If it is not sticking to the transfer tape, relay it down and press your credit card over it again.
Arrange the decal & transfer tape on the desired surface. Press the top edge onto the surface and
firmly smooth the tape all the way down, avoiding bubbling and wrinkles.
Now that your decal is in place, take your time and work your way to the other side.
Ex: slowly pull the white backing away from your decal. As you expose more of the decal backing smooth it onto your flat surface until you are at the end! :)
Finish the application by rubbing over the entire wall decal with the credit card in order to remove any air bubbles and activate the bond between the decal and the surface.
Remove the transfer tape from one corner & slowly roll it along the surface. If part of the wall decal sticks to the tape, simply roll the tape back, press down firmly with your credit card & continue peeling.
Remove any air bubbles by rubbing over the decal with a clean cloth (you can also poke bubbles with a fine needle and then smooth it out). On textured surfaces be sure to rub over the wall decal very firmly! This will ensure a proper bond between the wall decal and the surface, and will prevent it from peeling off over time. This phase is really important to ensure the wall decal will adhere properly to the surface. Bring extra care to this step in any case.
Enjoy your new design :)